NEWS

ULTRALIT HARD CURE is a 17.5% solid content lithium hardener and film-forming polymer curing agent for fresh and old concrete. Polymer content helps to protect surface from staining.

APPLICATION: Using a low-pressure sprayer, apply a single coat of Ultralit Hard Cure at a rate that covers the surface, but does not produce puddles. Treated surfaces should stay wet for 10-30 minutes following initial application. If needed, uniformly spread the product in a thin layer using a microfiber pad that should be pre-moistened with Ultralit Hard Cure prior to use.

Works well not only on fresh concrete. It is very popular on grinded and unground concrete. On old concrete, it is used as the final product.

• Freshly placed concrete (12-48 hours after pouring): 7-13 m²/L (70-130 mL/m²).
• Оld concrete: 5-10 m²/L (100-200 mL/m²).
• Polished concrete: 10-20 m²/L (50-100 mL/m²).

BENEFITS:

• 2 in 1: curing and hardening at the same time.
• Perfect curing properties.
• High active content – 17.5%.
• Active ingredients: 100% of total solids.
• Fast hardening and dustproofing – days instead of months.
• Can be applied to concrete of any age.
• Excellent penetration: 2-8 mm on steel trowled concrete.
• Increases abrasion resistance by 15-40%.
• Does not contribute to surface ASR or promote crazing.
• Good stain and water resistance.
• Very fast application: minutes instead of days.
• Absolutely “GREEN” and Planet Safe, water based.

CAN BE APPLIED ON NEW OR ANY AGE CONCRETE FLOORS OF:

• Roads and
• Highways
• Shopping malls
• Supermarkets
• Parking garages
• Airport hangars
• Warehouses
• Distribution centers
• Manufacturing plants
• Schools and universities
• Medical facilities
• Office buildings