-ULTRALIT HARD CURE is a 17.5% solid content lithium hardener and film-forming polymer curing agent for fresh and old concrete. Polymer content helps to protect surface from staining.

APPLICATION: Using a low-pressure sprayer, apply a single coat of Ultralit Hard Cure at a rate that covers the surface, but does not produce puddles. Treated surfaces should stay wet for 10-30 minutes following initial application. If needed, uniformly spread the product in a thin layer using a microfiber pad that should be pre-moistened with Ultralit Hard Cure prior to use.

• Freshly placed concrete (12-48 hours after pouring): 7-13 m²/L (70-130 mL/m²).
• Оld concrete: 5-10 m²/L (100-200 mL/m²).
• Polished concrete: 10-20 m²/L (50-100 mL/m²).